Strand Consulting is a Rebar Detailing company that provides proficient Rebar detailing service. We study all architectural and structural drawings to verify all elevations and geometry before starting our rebar detailing.
- Rebar Detailing
- As built drawings
- Rebar Take off
- Dimensional Drawings
Frequently Asked Question(s).
What are the Rebar Shop drawing or Placing drawings or Rebar submittal drawings?
Placing drawings are working drawings that show the number, size, length, and location of the reinforcing steel necessary for the placement and fabrication of the material. Placing drawings can comprise plans, details, elevations, schedules, material lists, and bending details. They can be prepared manually or by computer.
Purpose of the Rebar Shop drawing or Placing drawings or Rebar submittal drawings?
Placing drawings are intended to convey the A/E’s intent as covered in the contract documents. The contract documents plus any additions, such as addenda issued by the A/E (per terms agreed on in the contract if issued after the contract is made), constitute the sole authority for information in placing drawings. The placing drawings must include all information necessary for the complete fabrication and placing of all reinforcing steel.
Procedure to create the Rebar Shop drawing or Placing drawings or Rebar submittal drawings?
Placing drawings are prepared by a detailer in accordance with the A/E’s instructions contained in the contract documents. Any necessary, additional information must be supplied by the contractor concerning field conditions, field measurements, construction joints, and sequence of placing concrete. After approval by the A/E, including necessary revisions, the drawings may be used by the fabricator and placer.